HP LaserJet Pro MFP M130fw Setup

The HP LaserJet Pro M130fw is a monochrome printer with high-speed print, scan, copy, and fax features. It has 10% faster printing speeds than its predecessor printing up to 23 pages per minute. You can accomplish your tasks efficiently with this LaserJet printer which comes with an ADF. The original HP toner cartridges that come along with this printer are inbuilt with jet intelligence providing you exceptional speeds. The HP LaserJet Pro MFP M130fw setup is an easy process which you can complete without putting too much effort

Equipment Setup

  • To begin with, remove the HP Printer from its box
  • Then place the LaserJet printer on an even surface
  • Following this, take off the tapes and packing materials from the printer
  • Ensure to remove the protective film from the printer control panel
  • Make sure to recycle all the packing materials
  • Also, ensure not to remove the toner cartridge out of the printer
  • The toner cartridge comes inbuilt with your HP Printer ready for printing
  • Now open the input tray of the printer
  • Thereafter cautiously pull the dust cover out of the printer
  • Subsequently, press the sides of the dust cover until they are firmly in place after unfolding its sides
  • Now carefully align the dust cover on to the input tray
  • After that push the pins of the dust cover into the slots above the input tray till they snap into place
  • Then lift the dust cover and slide the paper guides to the outermost position
  • Following this, load a plain stack of paper onto the paper tray after fanning them properly
  • Push the stack of paper into the tray as per the tray capacity
  • Now slide the paper guides until they rest against the edge of the stack
  • Thereafter press the sides of the dust cover slightly before lowering it onto the paper tray
  • Make sure you press the sides before lowering the dust cover always
  • After that using the power cord that came along with your HP Printer, plug in one end in the rear of your printer
  • Plug in the other end of the power cord into an electrical socket and turn your printer on
  • Finally, set your preferences and complete the equipment setup of the HP LaserJet Pro M130fw printer

Connecting your HP LaserJet Pro M130fw to the Internet

Choose any one of the methods below to complete the HP LaserJet Pro MFP M130fw setup

HP LaserJet Pro MFP M130fw setup

HP LaserJet Pro MFP M130fw setup

Wired Setup

Prerequisites of a Wired Setup

  • Ensure that your network router has Ethernet ports
  • Make sure that your computer is connected to the router
  • Have an Ethernet cable ready

Setup

  • First, remove any protective covering over the Ethernet port on the rear of your printer
  • Thereafter, plug in the Ethernet cable into the printer
  • Finally, connect the Ethernet cable to the network router

Wireless Setup

Prerequisites of Wireless Setup

  • Network name and password
  • Ensure that your computer is connected to the wireless network

Setup

  • To begin with, on your printer control panel, swipe left to find the ‘Setup’ option
  • Touch the ‘Setup’ option and swipe up and choose ‘Network Setup’
  • Thereafter tap on the ‘Wireless’ option and choose the ‘Wireless Setup Wizard’ option
  • Now your HP LaserJet printer scans for the available networks and displays them
  • Following this, tap on your network name and enter the WEP or WPA passphrase
  • If your network name is not displayed, tap ‘Enter SSID’
  • Enter your network name after that and enter your network key to connect it
  • Finally, tap ‘OK’ after entering your network key to complete the wireless setup

HP LaserJet Pro M130fw Software Installation

Now you are just one step away from completing the HP LaserJet Pro MFP M130fw setup

  • Now using a web browser on your computer navigate to 123.hp.com/laserjet
  • Download the HP Easy Start on your computer
  • Thereafter open the file and begin installing
  • Select your HP Printer from the list of printers on your screen
  • If your HP Printer is not present, click on ‘My Printer Is Not Shown’
  • Select the ‘Wireless Network’ or ‘Ethernet Cable’ option
  • Following this, click continue
  • Otherwise, if you have a USB cable, choose the ‘USB cable’ option
  • Continue with the on-screen instructions
  • Connect and disconnect the USB cable when prompted by the software
  • Finally, complete the HP LaserJet Pro MFP M130fw setup by following the directions on the screen

If you have further queries about HP LaserJet Pro MFP M130fw, call our customer care anytime @ +1-844-876-5110 or visit 123.hp.com/setup.

Leave a comment