HP LaserJet 700 Color MFP M775 Setup and Installation

HP LaserJet 700 color MFP M775 printer is a desktop laser printer and we’ll see how to do HP LaserJet 700 color MFP m775 setup of this printer pans out!

1) Unpack the Printer

  • Pick a site to locate the printer which should meet the following requirements

Site Requirements

Temperature

Range

Humidity

Range

 

15° – 30°C

 

10% – 80%

Note: Involve at least 4 members in the mobility of the HP LaserJet 700 color MFP M775 printer as it weighs over 63 kgs

  • Take the HP LaserJet 700 color MFP M775 printer out of the box and get rid of the packaging materials from it
  • Get rid of the shipping tapes from the printer
  • Then open the document feeder of HP LaserJet 700 color MFP M775 printer and get rid of the foam protectors
  • Then take off the tray shipping lock after opening the tray 2

2) Load the Paper on to HP LaserJet 700 Color MFP M775 Printer

  • Modify the sliding front and adjust the paper guides to fit in the paper size
  • Then place the paper in the tray
  • Make sure the stack height fits well within the tray
  • Close the tray

3) Power On the HP LaserJet 700 Color MFP M775 Printer

  • Utilize the power cable and deploy a connection between the Printer and the electrical wall outlet

Note: Use official HP power cable to avoid any malfunctions

  • Your power source should meet the printer voltage rating

HP LaserJet 700 color MFP M775 printer’s voltage rating is either 100-127 Vac or 220-240 Vac along with 50/60 Hz

*Vac = Voltage Alternating Current

  • Click the power button of the printer
  • Make use of the printer control panel and pick the language, date & time of your wish

4) Advanced Setup of Network-connected Printers

HP LaserJet 700 Color MFP m775 Setup

HP LaserJet 700 Color MFP m775 Setup

  • Printer IP address is very vital for this setup process

Note: HP LaserJet 700 color MFP M775 Printer’s IP address varies according to the control-panel type

  • Select the Network button on the FutureSmart 3 control panel
  • On the FutureSmart 4 control panel, first, select the information icon and then select the Network button

5) Control Panels

HP LaserJet 700 color MFP M775 printer should be in an active state during the software installation process

So, these steps would help you get your printer back from the sleep mode;

Note: Steps vary according to the control panel which you’re using

FutureSmart 3 Control Panel

  • Scroll down on your Home screen and select the Administration button
  • Pick the General settings option
  • Select the Energy settings tab
  • Select wake/Auto-> All events option

Normally, the printers with FutureSmart 4 control panel will stay active during the software installation process

Does the HP LaserJet 700 Color MFP M775 Printer Works?

The printer verification steps also vary according to the control-panel type;

FutureSmart 3

  • Scroll down on the Home screen of your printer control panel and select the Administration button
  • Click and Open the Reports menu and Configuration/Status page
  • Select the Configuration page item
  • Select the Print button to print the configuration and Jetdirect pages

Note: Save these pages for a network-connected printer as Jetdirect pages have the printer’s IP address

  • IPv4: Manually configure the IP address if the IP address is either 0.0.0.0 or 192.0.0.192 or 169.254.x.x. If not, the network configuration must be successful
  • IPv6: The Printer must be fine to print if the IP address starts with “fe80”. If it’s not like that, manually configure the address
  • Locate the already printed configuration page on to the document feeder
  • Now select the Start button on your printer control panel which eventually will lead to printing a page
  • Consequently, locate the configuration page on the scanner glass of the HP LaserJet 700 color MFP M775 printer
  • Press the start button on your panel and then the printer will scan a page

FutureSmart 4

  • Select Reports on the Home screen of your control panel
  • Touch Configuration/Status page
  • Then print the configuration and Jetdirect pages

Note: You can find your Printer’s IP address on a Jetdirect page

  • Locate configuration page in the document feeder
  • Press the Start button on your control panel and you could see your HP LaserJet 700 color MFP M775 printer printing a page
  • Place the configuration page on the scanner glass of your printer
  • Press the Start button on the Home screen of your control panel and eventually, the printer scans a page

Upgrade the printer firmware regularly to relish the most-recent features!

Hope the aforementioned details about HP LaserJet 700 color MFP M775 setup would have enlightened you up to some extent. Visit our web page 123 hp com setup or call us @ +1-844-876-5110 for more help!

Leave a comment